국립부경대학교 | 조선해양시스템공학전공

교수진

교수사진

손정민교수

2008          부산대학교 조선해양공학과 공학사 
2010          부산대학교 조선해양공학과 공학석사 
2015          부산대학교 조선해양공학과 공학박사
 

2012 - 2015          선박해양플랜트연구소 해양플랜트연구부, 선임연구원 

■ 연구 분야

선박 및 해양구조물 안전설계

선박 및 해양구조물 사고 위험도 평가

재료역학1


재료역학2


재료역학실험


선체구조설계

 

전산선체구조역학 및 실험

 

■ 연구과제 

 Hull Vibration and Noise Analysis for G/T 1500 ton, the Research Vessel of Fishery Resources (2017)

- Sponsor: Korea Maritime Services Co., Ltd. (KOREA)

 

Ship Vibration and Noise Analysis of G/T 3990 Ton, Fishery Training Vessel (2017)

- Sponsor: Korea Maritime Consultants Co., Ltd. (KOREA)

 

JCO Process for Sour Resistant High Manganese Pipelines (2018)

- Sponsor: Steelflower Co., Ltd. (KOREA)

 

Development of Converter Program for Full Ship Structural Analysis (2018)

- Sponsor: Korea Research Institute of Ships and Ocean Engineering (KOREA)

 

Development of safety systems for eco-friendly LNG fueled ship (2018-2021)

- Sponsor: National Research Foundation of Korea (KOREA)

 

Development of Navigation Guide Technology based on Deep-Learning for Smart-ships (2019)

- Busan Innovation Institute of Industry, Science & Technology Planning (KOREA)

 

Strength Assessment for Cargo Structure and Fatigue Analysis of LNG Bunkering Ship (2019)

- Sponsor: Korea Research Institute of Ships and Ocean Engineering (KOREA)

 

Development of LNG Bunkering Operation Technologies based on Operation System and Risk Assessment (2019-2022)

- Sponsor: Korea Research Institute of Ships and Ocean Engineering (KOREA)

 

FPSO - Structural FE Analysis (Strength and Fatigue) (2021-2022)

- Sponsor: Det Norske Veritas


■ 연구논문

1.     J.M. Sohn, S.J. Kim, D.J. J.K. Seo, B.J. Kim and J.K. Paik, 2016, “Strength assessment of stiffened blast walls in offshore installations under explosions”, International Journal of Ships and Offshore Structures, 11(5): 551-560.

2.      J.M. Sohn, H.J. Cheon, K. Hong and S.H. Shin, 2016, “Equivalent design wave approach for structural analysis of floating pendulum wave energy converter”, International Journal of Ships and Offshore Structures, 11(6): 645-654.

3.      J.M. Sohn, D.M. Bae, S.Y. Bae and J. K. Paik, 2017, “Nonlinear Structural analysis of membrane-type LNG carrier cargo containment system under cargo impact  pressure loads at the cryogenic condition with a temperature of -163°C”, International Journal of Ships and Offshore Structures, 12(5): 722-733.

4.      D.M. Bae, J.M. Sohn, A.R. Prabowo, C. Bo, F.Z. Ahmad and W. Qing, 2016. “Numerical Simulation for the Collision Between Side Structure and Level Ice in Event of Side Impact Scenario”, Latin American Journal of Solids and Structures, 13:2991-3004.

5.      A.R. Prabowo, D.M. Bae, J.M. Sohn and C. Bo, 2016. “Energy Behavior on Side Structure in Event of Ship Collision Subjected to External Parameters”, Heliyon, 2(11):1-16.

6.      A.R. Prabowo, D.M. Bae, J.M. Sohn and A.F. Zakki, 2016. “Evaluating the Parameter Influence in the Event of a Ship Collision based on the Finite Element Approach”, International Journal of Technology, 7(4): 592-602.

7.      J.M. Sohn, S.J. Kim and J.K. Paik, 2017, “Development of Gas Detector Location Index Technique to Prevent Explosion Accidents of Offshore Plant”, Journal of the Society of Naval Architects of Korea, 54(1): 63-70 (in Korean).

8.      A.R. Prabowo, D.M. Bae, J.M. Sohn, A.F. Zakki, C. Bo and  J.H. Cho, 2017. “Effects of the Rebounding of a Striking Ship on Structural Crashworthiness during Ship-Ship Collision”, Thin-Walled Structures 115:225-239.

9.      A.R. Prabowo, C. Bo, D.M. Bae, S.Y. Bae, A.F. Zakki and J.M. Sohn, 2017. “Structural Analysis of the Double Bottom Structure during Ship Grounding by Finite Element Approach”, Latin American Journal of Solids and Structures, 14(6):1106-1123.

10.   A.R. Prabowo, S.J. Baek, H.J. Cho, J.H. Byeon, D.M. Bae and J.M. Sohn, 2017. “The Effectiveness of Thin-Walled Hull Structures Against Collision Impact”, Latin American Journal of Solids and Structures, 14(7):1345-1360.

11.   S.J. Kim, J.M. Sohn and J.K. Paik, 2017. “An Advanced Procedure for the Quantitative Risk Assessment of Offshore Installations in Explosions”, International Journal of Maritime Engineering, 159(A2), pp.123-138.

12.   A.R. Prabowo, D.M. Bae, J.H. Cho and J.M. Sohn, 2017. “Analysis of Structural Crashworthiness and Estimating Safety Limit Accounting for Ship Collisions on Strait Territory”, Latin American Journal of Solids and Structures, 14(8):1594-1613.

13.   J.M. Sohn and S.J. Kim, 2017. “Numerical Investigation of Structural Response of Corrugated Blast Wall Depending on Blast Load Pulse Shapes”, Latin American Journal of Solids and Structures, 14(9):1710-1722.

14.   S.J. Kim, J. Lee, S.H. Kim, J.K. Seo, B.J. Kim, Y.C. Ha, J.K. Paik, K.S. Lee, B. Park, M.S. Ki and  J.M. Sohn, 2017. “Nonlinear Structural Response in Jet Fire in Association with the Interaction between Fire Loads and Time-Variant Geometry and Material Properties”, Ocean Engineering, 144:118-134.

15.   Y.G. Ko, S.J. Kim, J.M. Sohn and J.K. Paik, 2018. “A Practical Method to Determine the Dynamic Fracture Strain for the Nonlinear Finite Element Analysis of Structural Crashworthiness in Ship”, Ships and Offshore Structures, 13(4):412-422.

16.   S.J. Baek, J.M. Sohn, J.K. Paik and S.J. Kim, 2018. “Development of a Method for Prediction of Residual Strength for Prevention of Secondary Accidents on Large Oil Tankers Subjected to Collisions”, Journal of the Society of Naval Architects of Korea, 55(2):144-152.

17.   A.R. Prabowo, T. Muttaqi, J.M. Sohn, D.M. Bae and A. Setiyawan, 2018. “On the Failure Behaviour to Striking Bow Penetration of Impacted Marine-Steel Structures”, Curved and Layer Structure, 5:68-79.

18.   A.R. Prabowo, T. Muttaqie, J.M. Sohn and D.M. Bae, 2018. “Nonlinear Analysis of Inter-island RoRo”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40:248.

19.   S.R. Cho, T. Muttaqi, Q.T. Do, H.Y. So and J.M. Sohn, 2018. “Ultimate Strength Formulation Considering Failure Mode Interactions of Ring-Stiffened Cylinders Subjected to Hydrostatic Pressure”, Ocean Engineering, 161:242-256.

20.   A.R. Prabowo, H.J. Cho, S.G. Lee, S.J. Baek, J.H. Byeon, D.M. Bae, J.M. Sohn and B.I. Harsritanto, 2018. “Evaluating Structural Crashworthiness and Progressive Failure of Double Hull Tanker under Accidental Grounding: Bottom Raking Case”, Open Engineering, 8:193-204.

21.   A.R. Prabowo, J.M. Sohn, D.M. Bae and T. Putranto, 2018. “Investigating Crashworthy Thin-walled Double Hull Structures in a Bottom Raking Incident by Nonlinear FE Simulations”, Journal of Engineering Technology, 6(2):266-281.

22.   D.K. Kim, W.C.K. Ng, O.J. Hwang, J.M. Sohn, and E.B. Lee, 2018. “Recommended Finite Element Formulations for the Analysis of Offshore Blast Walls in an Explosion”, Latin American Journal of Solids and Structures, 15(10):e115

23.   A.R. Prabowo, J.M. Sohn, D.M. Bae and J.H. Cho, 2018. “Estimating Structure Response and Progressive Failure of a Ship Hull under Side-Bow Collisions”, International Journal of Techinicla Gazette, 25(5):1513-1522.

24.   S.J. Kim and  J.M. Sohn, 2019. “Dynamic Structural Response Characteristics of New Concept Blast Walls Under Hydrocarbon Explosions”, Latin American Journal of Solids and Structures, 16(2):e161.

25.   S.J. Baek, J.M. Sohn, J.K. Paik and S.J. Kim, 2019. “Development of an Empirical Formula for Residual Strength Assessment to Prevent Sequential Events of Grounded Oil Tankers”, Journal of the Society of Naval Architects of Korea, 56(3):263-272.

26.   T. Muttaqi, D.Q. Thang, A.R. Prabowo, S.R. Cho and J.M. Sohn, 2019. “Numerical Studies of the Failure Modes of Ring-Stiffened Cylinders under Hydrostatic Pressure”, Structural Engineering and Mechanics, 70(4):413-443.

27.   A.R. Prabowo, H. Nubli and J. M. Sohn, 2019. “On the Structural Behaviour to Penetration of Striking Bow under Collision Incidents between Two Ships”, International Journal of Automotive and Mechanical Engine, 16(4): 7480-7497.

28.   A.R. Prabowoa, S. I. Cahyonoa, J. M. Sohn, 2019. “Crashworthiness Assessment of Thin-walled Double Bottom Tanker: A Variety of Ship Grounding Incidents”, Theoretical & Applied Mechanics Letters, 9: 320-327.

29.   M.S. Yi, J.K. Seo, J.M. Sohn and B.S. Jang, 2020. “Residual Stresses Distribution in Long Seam-welded Offshore Catenary Riser of High-Manganese Steel”, Ships and Offshore Structures, 15(3):325?339.

30.   D.M. Prabowoputra, A.R. Prabowo, S. Hadi and J.M. Sohn, 2020. “Assessment of Turbine Stages and Blade Numbers on Modified 3D Savonius Hydrokinetic Turbine Performance using CFD Analysis”, Multidiscipline Modeling in Materials and Structures (Published online).

31.   M. Yusvika, A.R. Prabowo, D.D. Tjahjana and J.M. Sohn, 2020. “Cavitation Prediction of Ship Propeller Based on Temperature and Fluid Properties of Water”, Journal of Marine Science Engineering, 8(6):465.

32.   S.G. Lee, Y.J. Yang, W.D. Jang and J.M. Sohn, 2020. “Predicting the Residual Fatigue Life of a Cargo Hull Tank using a Deep-learning Technique”, Journal of International Maritime Safety, Environmental Affairs, and Shipping , 4(3):84-92.

33.   T. Muttaqie, S.H. Park, S.R. Cho and J.M. Sohn, 2020. “Optimisation of the Design of a Steel-Welded Pressure Hull Structure based on Interactive Nonlinear Collapse Strength Analyses”, Ships and Offshore Structure (Published online)

34.   H. Nubli and J.M. Sohn, 2020. “CFD-based Simulation of Accidental Fuel Release from LNG-fuelled Ships”, Ships and Offshore Structure (Published online).

35.   A.R. Prabowo, A. Bahatmaka and J.M. Sohn, 2020. “Crashworthiness Characteristic of Longitudinal Deck Structures against Identified Accidental Action in Marine Environment: A Study Case of Ship?bow Collision, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42:584.

36.   A.R. Prabowo, C. Bo, J.M. Sohn and D.M. Bae, 2020. “Crashworthiness Assessment of Thin-walled Double Bottom Tanker: Influences of Seabed to Structural Damage and Damage-Energy Formulae for Grounding Damage Calculations”, Journal of Ocean Engineering and Science, 5:387-400.

37.   S.R. Cho, T. Muttaqie, S.H. Lee, J. Paek and J.M. Sohn, 2020. “Ultimate Strength Assessment of Steel-welded Hemispheres under External Hydrostatic Pressure”, Journal of Marine Science and Application, 19:615-633

38.   T. Muttaqie, S.H. Park, J.M. Sohn, S.R. Cho, I.S. Nho, S. Han, Y.S. Cho, 2021. “Implosion Tests of Aluminium-Alloy Ring-Stiffened Cylinders Subjected to External Hydrostatic Pressure”, Marine Structures, 78:102980.

39.   R. Ridwan, A. R. Prabowo, N. Muhayat, T. Putranto, and J.M. Sohn, 2020. “Tensile Analysis and Assessment of Carbon and Alloy Steels using FE Approach as an Idealization of Material Fractures under Collision and Grounding”, Curved and Layered Structures, 7:188?198.

40.   D.M. Prabowoputra , S. Hadi, J.M. Sohn and A. R. Prabowo, 2020. “The Effect of Multi-Stage Modification on the Performance of Savonius Water Turbines under the Horizontal Axis Condition”, Open Engineering, 10(1): 793-803.

41.   D.M. Prabowoputra , S. Hadi, A. R. Prabowo and J.M. Sohn, 2020. “Performance Investigation of the Savonius Horizontal Water Turbine Accounting for Stage Rotor Design”, International Journal of Mechanical Engineering and Robotics Research, 9(2):184-189.

42.   T. Muttaqie, S.H. Park, J.M. Sohn, S.R. Cho, I.S. Nho, P.S. Lee and Y.S. Cho, 2020. “Tests on the Serial Implosion of Multiple Cylinders subjected to External Hydrostatic Pressure”, Journal of the Society of Naval Architect of Korea, 57(4):213-220 (Korean).

43.   A.R. Prabowo, S.I. Cahyono, and J.M. Sohn, 2019. “Crashworthiness assessment of thin-walled double bottom tanker: A variety of ship grounding incidents”, Theoretical & Applied Mechanics Letters, 9:320-327.

44.   T. Muttaqie, S.H. Park, J.M. Sohn, S.R. Cho, I.S. Nho, S. Han, Y.S. P.S. Lee and Y.S. Cho, 2020. “Experimental Investigations on the Implosion Characteristics of Thin Cylindrical Aluminium-Alloy Tubes”, International Journal of Solids and Structures, 200?201: 64?82.

45.   Ikhsan, J. Triyono, A.R. Prabowo, and c 2020. “Investigation of Meshing Strategy on Mechanical Behaviour of Hip Stem Implant Design using FEA”, Open Engineering, 10(1):769?775.

46.   A.R. Prabowo, F. B. Laksono, and J.M. Sohn, 2020. “Investigation of Structural Performance subjected to Impact Loading using Finite Element Approach: Case of Ship-Container Collision”, Curved and Layered Structures, 7:17?28.

47.   H. Nubli and J.M. Sohn, 2020. “Procedure for Determining Design Accidental Loads in Liquified-Natural-Gas-Fuelled Ships under Explosion using a Computational-Fluid-Dynamics Based Simulation Approach”, Ships and Offshore Structure (Published online).

48.   J.M. Sohn and D.H. Jung, 2021. “Structural Assessment of a 500-Cbm Liquefied Natural Gas Bunker Ship during Bunkering and Marine Operation under Collision Accidents”, Ships and Offshore Structure (Published online).

49.   S.J. Kim, J.M. Sohn, P. Kujala and S. Hirdaris, 2021. “A Simplified Fluid Structure Interaction Model for the Assessment of Ship Hard Grounding”, Journal of Marine Science and Technology (Published  online) 

선박구조안전설계연구실